更多"The command output that follows was"的相关试题:
[单项选择] The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32
A. R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1
B. R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1
C. R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE
D. R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
[单项选择]With the following CLI command output performed on an LNS: show l2tp session L2TP session 1/2/3 is up .What is the meaning of the numeric values in the output?（）
A. session 1, destination 2, tunnel 3
B. destination 1, session 2, tunnel 3
C. tunnel 1, session 2, destination 3
D. destination 1, tunnel 2, session 3
[单项选择]Which command restores files from a volume group backup on a specified media?（）
A. mksysb-r
B. savevg-r
C. restorevg-r
D. restorevg files
[多项选择] Given the output from a show route extensive command (some information removed): 10.10.0.0/16(2 entries, 1 announced) Communities: 64512:666 90:4070 5834:66 172.16.1.0/24(1 entries, 1announced) Communities: 65000:1696 1234:666 50:7090 172.16.20.0/22 (3 entries, 1 announced)Communities: 65544:1000 80:1001 8431:14952 192.168.33.64/26 (2 entries, 1 announced) Communities:10:4307 9231:1071 64512:999 Which two routes appear when a show route community 64512:* command is executed?（）
A. 10.10.0.0/16
B. 172.16.1.0/24
C. 172.16.20.0/22
D. 192.168.33.64/26
[单项选择] Router R1 lists the following output from a show command. Which of the following is true about R1?（） R1# show ip v6 interface f0/0 FastEthernet0/0 is up, line protocol is up IPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456 No Virtual link - local address(es): Global unicast address(es): 2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI] Jo ined group address(es): FF02::1 FF02::2 FF02::1:FF:12:3456
A. R1's solicited node multicast address is FF02::1:FF:12:3456.
B. R1's 2000::4:213:19FF:FE12:3456 address is a global unicast with all 128 bits statically configured.
C. Address FF02::2 is R1's solicited node multicast.
D. R1's solicited node multicast, not listed in this output, would be FF02::213:19FF:FE12:3456.
[单项选择] The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18
A. This router has set the Weight of this route to 10.
B. This router's BGP table lists this route as an iBGP route.
C. This router's MED has been set to 10.
D. This router's BGP table lists an AS_Path length of 10 for this route.
[单项选择]Selected financial information gathered from the Matador Corporation follows:
A. 2007
B. 2006
C. 2005
D. Average debt
E. $ 792000
F. $ 800000
G. $ 820000
H. Average equity
I. $ 215000
J. $ 294000
K. $ 364000
L. Return on assets
M. 5.9%
N. 6.6%
O. 7.2%
P. Quick ratio
Q. 0.3
R. 0.5
S. 0.6
T. Sales
[单项选择]Which configuration command prevents a client from establishing multiple PPPoE connections from a single workstation?（）
A. sessions
B. sa-validate
C. split-horizon
D. duplicate-protection
[单项选择] The output of the command displays the following. The output of the command displays the following. FSUID PID PPID C PRI NI ADDR SZ TTY TIME CMD 120005 A0 40931 392412 67 20 1b23 201 pts/0 0.00 scriptA 100023 A 0 34596 23441 4 69 20 a328 341 pts/00.00 scriptB. What must be done to ensure scriptB receives dispatching priority over scriptA?（）
A. Run 'nice' command to increase the the NI value of scriptB
B. Run 'nice' command to increase the the NI value of scriptA
C. Run 'renice' command to increase the the NI value of scriptB
D. Run 'renice' command to increase the the NI value of scriptA
[单项选择]What is the output of this command?（）
A. A list of files that require a backup within 3 days
B. A list of files requiring more than 3 days of archivelogs to apply
C. A list of files that RMAN recommends be backed up only once in every three days, based on low volatility
D. A list of files for which a backup as already been performed in the last three days and which is required to be backed up again based on the high number of transactions performed on them
[单项选择]Which command can be used from a PC to verify the connectivity between hosts that connect through a switch in the same LAN?（）
A. ping address
B. tracert address
C. traceroute address
D. arp address
[单项选择]Which command will migrate a filesystem from onevolume group to another?（）
A. cpfs
B. cplv
C. mkfscopy
D. migratepv
[单项选择]As can be gathered from the passage, Aristotle's theories ______ in the Middle Ages.
A. were ignored by most scholars
B. hindered scientific progress
C. were declared as heresy
D. were basis of important discoveries
[单项选择]Which command can be used from a PC to verfy the connectivity between host that connect through path?（）
A. tracert address
B. ping address
C. arp address
D. traceroute address
[单项选择]As can be gathered from the passage, Kosovo______.
A. is one of the six republics
B. is part of Serbia
C. is autonomous
D. borders on Serbia
[单项选择] The fol lowing line of output was extracted from the output of the show ip bgp command on Router R1. Which of the following can be determined from this output?（） Network Next Hop Metric LocPrf Weight Path * 130.1.1.0/28 1.1.1.1 0 1 2 3 4 i
A. The route is learne d from an eBGP peer
B. The route has no more than three ASNs in the AS_PatH
C. The route is the best route for this prefix
D. None of these facts can be positively determined by this output
[多项选择] The following output was taken from the show ip bgp command on Router R2. In this case, which of the following commands are most likely to already be configured on R2?（） BGP router identifier 11.11.11.11, local AS number 11 ... Neighbor V AS Ms gRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 87 87 0 0 0 00:00:06 Idle (Admin) 2.2.2.2 4 3 173 183 41 0 0 00:58:47
A. router bgp 11
B. neighbor 1.1.1.1 remote- as 11
C. neighbor 2.2.2.2 prefix - limit 1
D. neighbor 1.1.1.1 shutdown
