更多"With the following CLI command outp"的相关试题:
[多项选择] With the following CLI command output performed on an LNS: show l2tp session L2TP session 1/to-Denver/2 is up Which two statements are correct? （）(Choose two.)
A. This command was done on the LNS
B. This command was done on the LAC
C. The 1 defines the destination number
D. The 1 defines the session number
[单项选择] The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32
A. R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1
B. R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1
C. R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE
D. R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
[单项选择]在窗体上画一个命令按钮，名称为Command1。 Private Sub Command1 Click（ ） Dim x As Integer，y As Integer x=10:y:0 Do x=x+2:y=y+x Print "x=", x; "y=",y If y＞20 Then Exit Do Loop Until x=18 End Sub 程序运行后，如果单击命令按钮，则在窗体上显示的内容是 ______。
A. x=12y=12 x = 14 y = 16 x=16 y=18
B. x=12 y=12 x= 16 y =28 x= 18 y=24
C. x=12 y=12 x= 14 y=44
D. x= 12 y=12 x= 14 y=26
[单项选择]在窗体上画一个命令按钮，然后编写如下事件过程：
Private Sub Command_Click( )
S=0
Do
s=(s + 1) * (s +2)
Number=Number+1
Loop Until S＞=30
Print Number，S
End Sub
程序运行后，输出的结果是( )。
A. 2 3
B. 3 182
C. 5 12
D. 10 20
[多项选择] The command output that follows was gathered from router R1. If correctly referenced by an EIGRP distribution list that filters outbound Updates, which of the following statements is true about the filtering of various prefixes by this Prefix list?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 se q 20 permit 0.0.0.0/0
A. Prefix 10.1.2.0/24 will be filtered due to clause 5
B. Prefix 10.1.2.224/26 will be filtered due to clause 5
C. Prefix 10.2.2.4/30 will be filtered due to clause 15
D. Prefix 10.0.0.0/8 will be permitteD
E. Prefix 0.0.0.0/ 0 will be permitteD
[多项选择]The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?（）
A. The default administrative distance is used.
B. The command is used to establish a static route.
C. The command is used to configure the router interfaces.
D. The command is used to establish a stub network.
E. The subnet mask for the source address is 255.255.255.0
[多项选择]The following configuration command was issued on router TK1:ip route 172.16.3.0 255.255.255.0 192.168.2.1.Which of the following statements are true regarding this command?（）
A. The command is used to establish a static route.
B. The default administrative distance is used.
C. The command is used to configure the default route.
D. The subnet mask for the source address is 255.255.255.0
E. The command is used to establish a stub network
[单项选择]Examine the following RMAN command:RMAN> CONFIGURE ENCRYPTION FOR DATABASE ON;RMAN> BACKUP DATABASE PLUS ARCHIVELOG;Which prerequisite must be met before accomplishing the backup?（）
A. Provide a password for the encryption
B. Set up an Oracle wallet for the encryption
C. No setup is required as it is a default encryption method
D. Both Oracle wallet and password must be set up for the encryption
[单项选择] Examine the following RMAN command: RMAN> CONFIGURE ENCRYPTION FOR DATABASE ON; RMAN> BACKUP DATABASE PLUS ARCHIVELOG; Which prerequisite must be met before accomplishing the backup?（）
A. Provide a password for the encryption
B. Set up an Oracle wallet for the encryption
C. No setup is required as it is a default encryption method
D. Both Oracle wallet and password must be set up for the encryption
[多项选择]Examine the following impdp command to import a database over the network from a pre-12c Oracledatabase (source): Which three are prerequisites for successful execution of the command?（）
A. The import operation must be performed by a user on the target database with the DATAPUMP_IMP_FULL_DATABASE role, and the database link must connect to a user on the source database with the DATAPUMP_EXD_FULL_DATABASE role.
B. All the user-defined tablespaces must be in read-only mode on the source database.
C. The export dump file must be created before starting the import on the target database.
D. The source and target database must be running on the same platform with the same endianness.
E. The path of data files on the target database must be the same as that on the source database.
F. The impdp operation must be performed by the same user that performed the expdp operation.
[单项选择] Examine the following ALTER command: SQL> ALTER DISKGROUP dgroup1 UNDROP DISKS; What is the purpose of the command?（）
A. It cancels all pending disk drops within the disk group.
B. It restores disks that are being dropped as the result of a DROP DISKGROUP operation
C. It mounts disks in the disk group for which the drop-disk operation has already been co pleted
D. It restores all the dropped disks in the disk group for which the drop-disk operation has already been completed
E. It adds previously dropped disks back into the disk group
[单项选择] You issue the following RMAN command to set a retention policy on a database: RMAN>CONFIGURE RETENTION POLICY TO REDUNDANCY 2; What will be the outcome of issuing this command?（）
A. After two days, a backup will be marked obsolete
B. After two days, a backup will be deleted from the media
C. If the RMAN repository has records of two or more recent backups of a file, then older backups will be deleted from the media.
D. If the RMAN repository has records of two or more recent backups of a file, then older backups will be marked obsolete.
[单项选择] The following line of output was gathered on Enterprise Router Ent1 using the command show ip route. Which of the following answers is most likely to be true, based on thi s output？（） B 128.107.0.0 [20/10] via 11.11.11.11, 00:02:18
A. This router has set the Weight of this route to 10.
B. This router's BGP table lists this route as an iBGP route.
C. This router's MED has been set to 10.
D. This router's BGP table lists an AS_Path length of 10 for this route.
