更多"Router R1 has eBGP connections to I"的相关试题:
[多项选择] Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
A. The show ip ospf neighbors command lists two neighbors off Fa0/0.
B. The show ip ospf neighbors command lists four neighbors off Fa0/0.
C. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
D. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.
[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages
[单项选择] Given table T1 has column I1 containing the following data: I1 1 2 3 4 If the following sequence of SQL statements is applied within a single unit of work: UPDATE t1 SET i1 = 3 WHERE i1 = 2; S AVEPOINT s1 ON ROLLBACK RETAIN CURSORS; UPDATE t1 SET i1 = 5 WHERE i1 = 3; SAVEPOINT s2 ON ROLLBACK RETAIN CURSORS;INSERT INTO t1 (i1) VALUES (6); ROLLBACK TO SAVEPOINT s1; UPDATE t1 SET i1 = 2 WHERE i1 = 4; COMMIT; What is the expected sequence of values returned from?（） SELECT i1 FROM t1 ORDER BY i1
A. 1, 2, 3, 3
B. 1, 2, 2, 4
C. 1, 2, 3, 3, 6
D. 1, 2, 2, 5, 6
[单项选择]ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?（）
A. Stub
B. Totally stubby
C. NSSA
D. Totally NSSA
[单项选择] Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
A. Subnet number
B. Next - hop router IP address of the route
C. Whether the route is an E1 or E2 route
D. The ro ute's tag
E. The number of router hops between the router and the subnet
[多项选择] Router R1 has the following configuration. Assuming R1's F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?（） interface f0/0 ipv6 address 2345:0:0:8::1/64
A. 2345:0:0:8::1
B. 2345:0:0:8:0:FF:FE11:1111
C. FE80::8:0:FF:FE11:1111
D. FE80:0:0:8::1
[单项选择] R1 has correctly configured EIGRP to filter routes using a route map named question. The configuration that follows shows the entire route map and related configuration. Which of the following is true regarding the filtering action on prefix 10.10.10.0/24 in this case?（） route - map question deny 10 match ip address 1 route - map question permit 20 match ip address prefix- list fred ! access - list 1 deny 10.10.10.0 0.0.0.255 ip prefix - list fred permit 10.10.10.0/23 le 25
A. It will be filtered due to the deny action in route map clause 10
B. It will be allowed because of the double negative (two deny references) in clause 10
C. It will be permitted due to matching clause 20's reference to prefix - list freD
D. It will be filtered due to matching the implied deny all route map clause at the end of the route map
[单项选择] Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable OSPFv3 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about OSPFv3 on R1 after this configuration has been pasted into R1?（） ipv6 router ospf 1 ipv6 unicast- routing interface f0/0 ipv6 address 2000 ::1/64 ipv6 ospf 1 area 1 interface s0/0/0 ipv6 address 2001::/64 eui - 64 ipv6 ospf 1 area 0
A. OSPF works on F0/0 and S0/0/0 without further configuration
B. OSPF works with the addition of one command: a no shutdown command in OSPF router configur ation modE
C. OSPF works with the addition of one command: an router - id command in OSPF router configuration modE
D. OSPFv3 needs at least two more configuration commands before it works on R1
[单项选择]在电路中R1和R2并联，R1=2Ω，R4=4Ω，则它们电流比I1： I2=（）。
A. 1：2
B. 1：4
C. 2：1
D. 4：1
[单项选择]在电路中R1和R2并联，R1＝2Ω，R2＝4Ω，则它们的电流比I1：I2＝（）。
A. 1：2
B. 1：4
C. 2：1
D. 4：1
[单项选择]两个电阻并联，其中R1为200Ω，通过R1的电流I1为0.2A，通过整个并联电路的电流I为1A，则R2=（）Ω。
A. 50
B. 40
C. 30
D. 20
[单项选择] Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）
A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.
[单项选择] Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router. Which of the following could be the link local address of R1's interface S0/0?（）
A. FEA0::200:FF:FE11:0
B. FE80::200:FF:FE11:1111
C. FE80::0213:19FF:FE7B:0:1
D. FEB0::211:11FF:FE11: 1111
[单项选择] R1 has 5 working interfaces, with EIGRP neighbors existing off each interface. R1 has routes for subnets 10.1.1.0/24, 10.1.2.0/24, and 10.1.3.0/24, with EIGRP integer metrics of roughly 1 million, 2 million, a nd 3 million, respectively. An engineer then adds the ip summary - address eigrp 1 10.1.0.0 255.255.0.0 command to interface Fa0/0. Which of the following is true?（）
A. R1 loses and then reestablishes neighborships with all neighbors.
B. R1 no longer advert ises 10.1.1.0/24 to neighbors connected to Fa0/0.
C. 1 advertises a 10.1.0.0/16 route out Fa0/0, with metric of around 3 million (largest metric of component subnets).
D. R1 advertises a 10.1.0.0/16 route out Fa0/0,with metric of around 2 million (med ian metric of component subnets).
[单项选择] 在电路中R1和R2并联，R1=2Ω，R2=4Ω，则它们的电流比I1：I2=（）。
A. 1∶2
B. 1∶4
C. 2∶1
D. 4∶1
[多项选择]A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which of the following can influence which o f those routes become feasible successor routes, assuming that you follow the Cisco recommended practice of not changing metric weights？（）
A. The configuration of EIGRP offset lists
B. Current link loads
C. Changing interface delay settings
D. Configu ration of variance
