更多"Which method will configure an e-ma"的相关试题:
[单项选择]Which method will configure an e-mail notification when permanent hardware errors are logged in the errorlog？（）
A. Create or update the errnotify stanza in the ODm
B. Update errpt daemon configuration file /etc/errpt.conf.
C. Update errpt daemon configuration file /var/adm/errpt.conf.
D. Define a notification alias in the /etc/syslog.conf file with the *.error stanza
[单项选择]Which method loads the configuration which was active before your last commit?（）
A. load replace last-active
B. load rollback 1
C. rollback 1
D. rollback last-active
[单项选择]Which options must you configure while performing an automated Tablespace Point-in-Time Recovery (TSPITR) by using Recovery Manager (RMAN)?（）
A. New channels for restore and recovery tasks
B. New name for the data files of the tablespace
C. Auxiliary name for the data files of the tablespace
D. Auxiliary destinations for an auxiliary set of data files
[多项选择]Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）
A. TestKingRouter(config)# router ospf 0
B. TestKingRouter(config)# router ospf 1
C. TestKingRouter(config)# router ospf area 0
D. TestKingRouter(config)# network 192.168.16.0 0.0.0.255 0
E. TestKingRouter(config)# network 192.168.16.0 0.0.0.255 area 0
F. TestKingRouter(config)# network 192.168.16.0 255.255.255.0 area 0
[单项选择]Which command will configure a directory /commonfiles so that a user cannot delete files owned by other users in the same group?（）
A. chmod +S /commonfiles
B. chmod 4775 /commonfiles
C. chmod 1777 /commonfiles
D. chmod -orgx /commonfiles
[单项选择]Which command would correctly configure a serial port on a router with the last usable host address in the 192.216.32.32/29 subnet？（）
A. Router(config-if)# ip address 192.216.32.38 255.255.255.240
B. Router(config-if)# ip address 192.216.32.39 255.255.255.224
C. Router(config-if)# ip address 192.216.32.63 255.255.255.248
D. Router(config-if)# ip address 192.216.32.39 255.255.255.248
E. Router(config-if)# ip address 192.216.32.38 255.255.255.248
[多项选择]Which three actions are required to configure the Flashback Database? （）
A. set Flash Recovery Area
B. enable Flashback logging
C. create FLASHBACK tablespace
D. start the database in the ARCHIVELOG mode
E. start the database in the NOARCHIVELOG mode
[单项选择]Which command is used to initialize and configure a NIM master?（）
A. /usr/sbin/nim_init
B. /usr/bin/installnim
C. /usr/sbin/nimconfig
D. /usr/sbin/setup_server
[单项选择]The method in which the writer believes is most effective for the poor benefiting from the rich is ______.
A. amassing all products from the last two years and reallocating them
B. ensuring the majority of products available are more useful to the poor
C. offering low priced stock that the poor could afford
D. by limiting the buying of the rich
[单项选择]Which command will configure a default route on a router?（）
A. router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
B. router(config)# ip default-route 10.1.1.0
C. router(config)# ip default-gateway 10.1.1.0
D. router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
[单项选择]Which command would you configure globally on a Cisco router that would allow you to view directly connected Cisco devices?（）
A. enable cdp
B. cdp enable
C. cdp run
D. run cdp
[单项选择]Which option is correct to configure the maximum transmit packet size of a Fast Ethernet interface?（）
A. set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200
B. set interfaces fe-0/0/0 mtu 1200
C. set interfaces fe-0/0/0 unit 0 mtu 1200
D. set interfaces fe-0/0/0.0 mtu 1200
[单项选择]Which command is used to configure a default route?（）
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
[单项选择]Which procedure should be used to configure the system to prevent all users from using the ‘at’ command?（）
A. Create a /var/adm/cron/at.allow file with no entries
B. Create a /var/adm/cron/at.deny file with '*' as the only entry
C. Create a /var/adm/at/at.deny file with 'ALL' as the only entry
D. Create a /var/adm/at/at.allow file with 'NONE' as the only entry
