更多"During system boot, rootvg fails to"的相关试题:
[单项选择]During a system administrator attempt to boot a server in normal mode, the boot process displays LED 299 and Led 201 and then stops. The LED 201 indicates that a ROS init or checkstop was detected. Which of the following options is the most probable cause?()
A. A corrupted JFS log device
B. A corrupted boot logical volume
C. An incorrect rc.boot entry in /etc/inittab file
D. A problem initializing paging space
[单项选择]During system boot, rootvg fails to vary on, causing an LED code of 0552. What is the most likely cause for rootvg not varying on?()
A. Missing blv
B. Network problem
C. Wrong boot table
D. Corrupted file system
[单项选择] During system boot, the boot process hangs at LED 0551. Which of the following is a likely cause()
A. A network problem
B. corrupted filesystem
C. corrupted ODM
D. corrupted /etc/inittab file
[单项选择]During a system boot, an error message appears concerning a paging space, paging00. The paging space was located on hdisk2, but the disk was removed from the system without proper software procedures. Which of the following commands should be used as the first step in the process of recovery?()
A. mkps paging00 hdisk0
B. chpv -v r hdisk2
C. chps -a n paging00
D. reducevg rootvg hdisk2
[单项选择]During system startup, many applications are starting that are not needed. Which of the following can be used to evaluate all startup applications?()
A. Computer Management Utility
B. Add/Remove Programs
C. Autoexec.bat file
D. MSCONFIG
[单项选择]During system boot, the system hangs at LED 0C31. What is the first step the system administrator should take to correct the problem?()
A. Check system console connections
B. Check system network connections
C. Boot in service mode and change the bootlist
D. Boot from the AIX installation media and mount rootvg filesystems
[单项选择]Power supply system was not damaged during the storm.
[单项选择]The supply of copper in the mines had______, causing great concerns among the people of the town.
A. increased
B. diminished
C. extended
D. devalued
[单项选择]During a NIM install, the system stops with the LED code 611.What is the cause of the issue?()
A. A failure to NFS mount filesystems from the NIM client
B. A failure to NFS mount filesystems from the NIM master
C. A failure to retrieve the tftp client info from the NIM master
D. A failure to retrieve the tftp server info from the NIM master
[单项选择] After mirroring rootvg, a system administrator wantsto validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?()
A. Run a bosboot -a command
B. Mirror the hd5 on the two disks
C. Set up another service mode bootlist
D. Check the disks using a lsvg -p rootvg command
[单项选择]An AIX system has a rootvg plus a separate volume group for database application. Which of the following commands are sued to backup the entire system?()
A. smitty mksysb (select additional volume group)
B. mkszfile && mksysb /dev/rmt0
C. smitty mksysb AND smitty savevg
D. smitty savevg (select additional volume group)
[单项选择]Rootvg has just been mirrored to a second disk. Which of the following actions should be performed to boot the system off of either disk?()
A. Extendvg to include both disks in the rootvg
B. Copy the hd5 logical volume to hdisk1
C. Run the bosboot and bootlist commands
D. Reset the dump device to /dev/sysdumpnull
[单项选择] An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk soit can be used as theprimary boot partition on the next reboot. Which command should the administrator use?()
A. bosboot -ad hdisk2
B. mkblv -y bootlv hdisk2
C. crlv -t bootlv -d hdisk2
D. bootlist -om normal hdisk2
[单项选择] An administrator has mirrored rootvg onto hdisk1,after the physical volumes finished syncing the administrator wants to add the newdisk to the boot order.Currently the boot order looks like:hdisk0 blv=hd5. Which of the following commands will add hdisk1 to the current boot order?()
A. bootset -a hdisk1
B. bootlist -om normal hdisk1
C. setbootlist -m hdisk0 hdisk1
D. bootlist -om normal hdisk0 hdisk1
[单项选择]During system initialization, which command script is executed through the /etc/inittab to activate page spaces and mount filesystems?()
A. rc
B. init
C. rc.boot
D. rc.init
[单项选择] After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?()
A. Run a bosboot -a command
B. Mirror the hd5 on the two disks
C. Set up another service mode bootlist
D. Check the disks using a lsvg -p rootvg command
[单项选择]During reboot the system hangs with LED 0581 that indicates "Configuring TCP/IP." Which recovery procedures should be taken?()
A. Boot in maintenance mode, and verify the Ethernet adapter configuration.
B. Boot in maintenance mode, access the rootvg and check the /etc/inittab for corruption.
C. Boot in maintenance mode, access the rootvg and rebuild the boot image using the bosboot command.
D. Boot in maintenance mode after verifying the network connection, access the rootvg and check the /etc/rc.net file.