更多"[单选题]Transponder Mode sel at AUTO, "的相关试题:
[单选题]How does cargo fire extinguishing system work？
A. The bottle has two discharge heads, one for each compartment. When a member of the flight crew presses the DISCH pushbutton for either compartment, the action ignites the corresponding squib on the fire bottle, which then discharges extinguishing agent into that compartment.
B. The bottle has three discharge heads, one for forward compartment，the other for the after compartment，extinguish automatically.If it is failure，extinguish manually。
C. Two bottle have two discharge heads, one for each compartment. When a member of the flight crew presses the DISCH pushbutton for either compartment, the action ignites the corresponding squib on the fire bottle, which then discharges extinguishing agent into that compartment.
[单选题]how does the invalid sidestick turn to available
A. pressing takeover pushbutton of either sidestick
B. pull the invalid sidestick with more force than the other pilot
C. the invalid sidestick cannot be available again
[单选题]In flight, how does the FMGS position automatically update?
A. use the data from the selected NDB,VOR or DME station
B. after the pilot selects DME station
C. use DME through automatic tuning function
[单选题]On localizer scale, how much deviation does one dot represent?
A. ±0.6°
B. ±0.8°
C. ±1.0°
[单选题]How does FMGC calculate approach speeds(VLS、VAPP、F、S、Green Dot)？
A. use performance model and the predicated landing weight (LW)
B. use the performance model and the current gross weight at transition to the approach phase
C. Both of the above
[单选题]How many lower deck compartments does the A320 aircraft have and how many compartments can they be subdivided into?
A. 2, 4
B. 2, 5
C. 3, 5
[单选题]On glide scale, how much deviation does one dot represent?
A. ±0.4°
B. ±0.6°
C. ±0.8°
[单选题]将客舱增压MODE SEL按钮转换到MAN位（ ），然后在回到AUTO位，将选择另一套系统。
A.至少3秒
B.至少5秒
C.至少10秒
[多选题]200H设备安全计算机OPE8-6A板板卡功能 ( )
A.和STM通信
B.输入速度信号
C.实现模式转换功能
D.输入BTM的CD检测信号
[多选题]200H车载设备VC单元OPE8-6A的作用 ( )
A.接收速度信号
B.接收轨道电路信息
C.进行速度比较
D.设备整体的故障检测
[多选题]CTCS2-200H型车载列控系统VC-OPE8板的作用是将制动指令 ( )传输给AMP板。
A.BR7
B.BR4
C.BR1
D.EB
[多选题]CTCS2-200H型车载列控系统VC-OPE8板的作用是将制动指令 ( )传输给RLU单元。
A.BR7
B.BR4
C.BR1
D.PCUT
[单选题]Model Sel功能的作用是 （ ）
A.反向通道
B.失控保护
C.模型切换
[单选题]Amber FAULT light on MODE SEL pushbutton of fuel mode will turn on when：
A. Fuel feed pressure descends
B. CTR is above 250kg, any wing tank is below 5000kg
C. Two CTR Pumps selects OFF position
[单选题]During fast alignment, MODE sel should be change from OFF to NAV in ____.
A. A. 3s
B. B. 5s
C. C. 7s
[单选题]On fuel control panel of cockpit, MODE SEL pushbutton controls
A. CTR transfer valve and Wing pump
B. CTR transfer valve
C. Wing pump
[单选题]MODE SEL pushbutton sw of fuel mode is at AUTO position, they stop automatically ( ) after center tank low level is reached.
A. 2 minutes
B. 5 minutes
C. 10 minutes
[单选题]When ATT HDG and AIR DATA sel at NORM, which is correct?
A. A. ADIRU 1 supplies data to PFD 1, ND 1; ADIRU 2 supplies data to PFD 2, and ND2
B. B. ADIRU 1 supplies data to PFD 1, ND 1, RMI and VOR/DME; ADIRU 2 supplies data to PFD 2, and ND2
C. C. ADIRU 1 supplies data to PFD 1; ADIRU 2 supplies data to PFD 2
[单选题]Use of the autothrust is approved ____ in selected or managed mode.
A. with AP
B. with FD
C. with or without AP/FD
