更多"Which of the following troubleshoot"的相关试题:
[单项选择]Which of the following network modifications should be implemented to extend the wirelessnetwork range and allow out-of-range users to share the Internet connection?()
A. Create a new VLAN for the out-of-range users.
B. Add a wireless access point for the out-of-range users.
C. Upgrade the out-of-range users’ SSID searching software.
D. Enable network sharing on the users’ computers that are within range.
[单项选择]Which of the following steps enables offline files in Windows 2000 and Windows XP?()
A. Control Panel>Administrative Tools>Computer Management
B. Control Panel>Administrative Tools>Component Services
C. Windows Explorer>Tools>Folder Options>Offline Files
D. Windows Explorer>Tools>Synchronize>Setup
[单项选择]Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?()
A. Format the partition
B. Load any RAID or SATA drivers needed
C. Partition the drive
D. Configure Windows settings
[多项选择]Which of the following steps are necessary in order to add a new VLAN to a switched network?()
A. Create the VLAN.
B. Name the VLAN.
C. Configure an IP address for the VLAN.
D. Add the desired ports to the new VLAN.
E. Add the VLAN to the VTP domain.
[单项选择]Of the following steps, which occurs before the others in making a decision worksheet
A. Listing the consequences of each solution.
B. Calculating a numerical summary of each solution.
C. Deciding which consequences are most important.
D. Writing down all possible solutions.
[单项选择] Given the following steps, which would be the correct order to create a backup of an Oracle database in NOARCHIVELOG mode?() 1.shutdown immediate from RMAN 2.Log into RMAN 3.startup mount from RMAN 4.backup database 5.alter database open 6.backup database plus archivelog delete input
A. 2,3,1,4,5
B. 2,1,3,6,5
C. 1,3,5,4
D. 2,1,3,5,6
E. 2,1,3,4,5
[多项选择]Which of the following correctly describe steps in the OSI data encapsulation process?()
A. The transport layer divides a data stream into segments and may add reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.
[多项选择]Which three of the following steps are mandatory when configuring MPLS on Cisco IOS? ()(Choose three.)
A. start LDP
B. enable CEF switching
C. configure the MPLS ID
D. disable IP TTL propagation
E. configure conditional label advertising
F. enable label switching on frame mode interfaces
[单项选择]From the DX WebUI Dashboard, which steps are used for creating a new admin user? ()
A. Click Admin > Users. Enter username, password, role, account status, and email.
B. Click Admin > Users. Enter username, password, role, account status, and user class.
C. Click Users > Manage Users. Enter username, password, role, account status, and user class.
D. Click Users > Manage Users. Enter username, password, ActiveDirectory domain, account status, and role.
[单项选择]Which of the following options lists the steps in PPP session establishment in the correct order?()
A. Optional authentication phase, link establishment phase, network layer protocol phase.
B. Network layer protocol phase, link establishment phase, optional authentication phase.
C. Network layer protocol phase, optional authentication phase, link establishment phase.
D. Link establishment phase, network layer protocol phase, optional authentication phase.
E. Link establishment phase, optional authentication phase, network layer protocol phase.
F. Optional authentication phase, network layer protocol phase, link establishment phase.
[单项选择] Which steps are mandatory to enable Direct NFS?() 1. Mount all required file systems using the kernel NFS driver. 2. Create an oranfstab file containing the attributes for each NFS server to be accessed using Direct NFS. 3. Replace the ODM library libodm11.so_stub with libodm11.so.
A. 2 and 3
B. 1 and 3
C. 1 and 2
D. 1, 2 and 3
[单项选择] You are troubleshooting an issue which is causing full-sized packets entering the MPLS cloud be dropped. You have discovered that one of the switches in the MPLS core is not a Cisco switch, but otherwise the MPLS MTU size is set to 1508 bytes on the routers. Based on this information, which of these may be the reason the packets are being dropped?()
A. The switch on you MPLS core that was not produced by Cisco does not support oversized packets
B. No switches support oversized packets
C. By definition, the maximum MTU is 1500 bytes
D. As MPLS VPN labeling increases the size of the packet by 8 bytes, the IP MTU should have been changed to 1508
[单项选择]When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?()
A. ping atm vci 0.100 interface at-0/1/0 end-to-end
B. ping atm vci 0.100 interface at-0/1/0 circuit
C. ping atm vci 0.100 interface at-0/1/0 far-end
D. ping atm vci 0.100 interface at-0/1/0 final-hop
[单项选择]In a workgroup, all of the following steps are required for a DHCP server EXCEPT().
A. activate the scopes.
B. authorize the server.
C. configure the scopes.
D. install DHCP service.
[多项选择]Which two steps are needed when configuring multiple RPs using MSDP within a single PIM domain? ()
A. Configure a non-unique address on the loopback interface for use by the PIM RP.
B. Configure MSDP with the unique address (router ID) as the local address of the peer.
C. Configure MSDP with the non-unique address (router ID) as the local address of the peer.
D. Configure a unique address on the loopback interface, used as the PIM RP.