更多"A user states that the wireless rou"的相关试题:
[单项选择]A user states that the wireless on their laptop was working when they where at home, however,now in the office no wireless connection can be made. Which of the following should the technician check FIRST?（）
A. If the wireless is enabled
B. If the laptop is connected to the correct gateway
C. If the SSID is enabled
D. If the DHCP address scheme is correct
[单项选择]Using the command user@router# load override lastest.conf where in the file system will the lastest.conf be located?（）
A. /var/home/user
B. /var/config/save0/
C. /var/tmp
D. /config
[单项选择]Using the command, user@router# load override latest.conf, where in the file system will the latest.conf be located?（）
A. /var/home/user/
B. /var/config/saved/
C. /var/tmp/
D. /config/
[单项选择]You have just issued the command user@router# save current.conf.Assuming the default settings, where in the file system is current.conf saved?（）
A. /var/tmp/
B. /var/config/saved/
C. /var/home/user/
D. /config/
[单项选择]A Windows server has rebooted by itself several times.There are several functioning non-Windows servers in the same rack that are connected to the same uninterruptible power supply（UPS）.Which of the following is the MOST likely cause of the reboots？（）
A. The UPS is malfunctioning.
B. The user traffic to the server is too high.
C. A BSOD is occurring.
D. The non-Windows servers cannot be located on the same UPS as the Windows server.
[多项选择] Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）
A. Receive - only
B. Stub
C. Static
D. Summary
E. Connected
F. Dynamic
[单项选择]Router A is unable to reach Router B.Both routers are running ios version 12.0.After reviewing the command output and graphic,what is the most likely cause of the problem?（）
A. incorrect bandwidt h configuration
B. incorrect LMI configuration
C. incorrect map statement
D. incorrect IP address
[多项选择] Router R1 is three router hops away from subnet 10.1.1.0/24. According to various show interfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100. Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）
A. Bandwidth of 101,500
B. Bandwidth of about 34,000
C. Bandwidth of 500
D. Delay of 1200
E. Delay of 2010
F. Delay of 20100
[单项选择] Router B1, an internal router in area 1, displays the following output. The only two ABRs connected to area 1 are performing Type 3 LSA filterinG. Which of the following answers is true based on the information in the output from B1?（） R1# show ip route 10.1.0.0 255.255.0.0 longer - prefixes ! Legend lines omitted for brevity 10.0.0.0/8 is variably subnetted, 17 subnets, 3 masks O 10.1.2.0/24 [110/658] via 10.10.13.1, 00:00:32, Serial0/0/0.1 O IA 10.1.1.0/24 [110/658] via 10.10.23.2, 00:41:39, Ser ial0/0/0.2 O IA 10.1.3.0/24 [110/658] via 10.10.23.2, 00:41:39, Serial0/0/0.2
A. A Type 3 LSA for 10.2.2.0/24 was filtered by both ABRs
B. A Type 3 LSA for 10.1.2.0/24 was not filtered by both ABRs
C. A Type 3 LSA for 10.1.3.0/24 was not filtered by at least one ABR
D. A Type 3 LSA for 10.1.1.0/24 filtered by both ABRs
[单项选择] Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?（）
A. PPP on the ATM interface
B. VPI/VCI on the dialer interface
C. IP address on the ATM interface
D. CHAP on the dialer interface
[单项选择] Router R1 connects to Router R2 over an Ethernet LAN with both routers using their F0/0 interfaces. R1 learns a route from R2 using EIGRP f or IPv6. That route lists F0/0 as the outgoing interface with R2 as the next hop. The configuration excerpt shows all relevant configuration on R2's F0/0 interface. Which of the following is true about R1's route?（） interface f0/0 mac - address 1111.1111.1 111 ipv6 address 2000::/64 eui - 64 ipv6 address 2001::1/64
A. The next hop is 2000::1311:11FF:FE11:1111
B. The next hop is FE80::1311:11FF:FE11:1111
C. The next hop is FE80::5111:11FF:FE11:1111
D. The next hop is 2001::1
[单项选择] Router R1 sits inside OSPF area 1. Router R2 redistributes an E1 route into OSPF for prefix 2.2.2.0/24, with external metric 20. Router R22 redistributes an E2 route for the same prefix/length, external metric 10. Under what conditions will R1 choose as it s best route the route through R22?（）
A. R1 will always choose the route through R22.
B. As long as R1's best internal OSPF cost to reach R22 is less than 10.
C. As long as R1's best internal OSPF cost to reach R22 is less than 20.
D. R1 will never choo se the route through R22 if the E1 route through R2 is available.
[简答题]在配EIGRP的时候（frame-relay的NBMA）命令router（config-router）#neighbor 192.168.1.129 是什么意思呢？
[单项选择] You have a Level 1-only router (Router A) in IS-IS area 49.0001. How does Router A learn how to reach prefixes in other areas?（）
A. Router A must have a Level 2 adjacency with the Level 1/Level 2 router in area 49.0001.
B. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSP it floods into area 49.0001.
C. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 link-state PDU (LSP) it floods into area 49.0001.
D. The Level 1/Level 2 router in area 49.0001 advertises these prefixes into area 49.0001 using a Level 2 LSP it floods into the area.
