更多"After a technician installs a new C"的相关试题:
[单项选择]A technician installs a new sound card but no sound can be heard. Which of the following utilities can be used to see an error?（）
A. MSCONFIG
B. Device Manager
C. DXDIAG
D. REGEDIT
[单项选择]A technician installs a new video card in a desktop with onboard video. The technician boots the unit but sees no display. The monitor power light is on and the OS seems to be loading. Which ofthe following is the MOST likely cause?（）
A. The display is defective.
B. The video card needs to be flashed.
C. The internal adapter has not been disabled.
D. The new video card is defective.
[单项选择]After a technician installs a video card, which of the following should the technician configure NEXT?（）
A. Resolution
B. Colors
C. Dots per inch
D. Refresh rate
[单项选择]A technician installs a local web server which is not accessible from the network. Which of the following is the local IP address that the web server should be using on the loopback adapter?（）
A. 127.0.0.1
B. 172.31.146.1
C. 192.168.1.1
D. 10.1.1.1
[单项选择]A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?（）
A. Reboot the computer
B. Remove the drive and reinstall
C. Install the device driver
D. Flash the BIOS
[单项选择]After the new technique was introduced, the factory produced ________ tractors in 1998 than the year before.
A. as twice many
B. as many twice
C. twice as many
D. twice many as
[单项选择]A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）
A. Windows cannot be booted from a controller card.
B. The hard drive must have Windows reinstalled because a new controller card was installed.
C. The SATA controller card was not set as a boot device in the computer BIOS.
D. The new controller must have the correct jumper settings for Windows mode.
[单项选择]After the new technology was brought in, this year's production of the cars in our factory is five times ______ it was five years ago.
A. more
B. than
C. what
D. as
[多项选择] Immediately after adding a new disk to or removing an existing disk from an ASM instance, you find that the performance of the database goes down initially until the time the addition or removal process is completed, and then gradually becomes normal. Which two activities would you perform to maintain a consistent performance of the database while adding or removing disks?（）
A. Define the POWER option while adding or removing the disks
B. Increase the number of ARB processes by setting up a higher value for ASM_POWER_LIMIT.
C. Increase the number of DBWR processes by setting up a higher value for DB_WRITER_PROCESSES
D. Increase the number of slave database writer processes by setting up a higher value for DBWR_IO_SLAVES
[单项选择]After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?（）
A. IRQ Manager
B. BIOS
C. Device Manager
D. Hardware Compatibility List
[单项选择]After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
A. Install a larger fan near the hard drive to cool the system.
B. Clean the drive with compressed air and continue to use it.
C. Remove and replace the drive.
D. Apply more thermal compound and reseat the drive.
[单项选择]After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）
A. Run CHKDSK
B. Boot to ERD
C. Run MSCONFIG
D. Go into Safe Mode
[填空题]如果在开机后提示“CMOS Battery State Low”，有时可以启动，使用一段时间后死机，这种现象大多数是（）引起的。
[单项选择]I got a new battery for my recorder only last week, but it seems to have ______ already.
A. worn out
B. run down
C. knocked off
D. gone off
[单项选择]After applying a new driver to a NIC, the server reboots and fails to restart. Which of the following is the BEST way to resolve the problem?（）
A. Boot using recovery console and restore the previous driver.
B. Boot the server, press F8 and access last known good configuration.
C. Restore the server using last backup tape.
D. Boot the server with ASR option.
[单项选择]After several fruitless attempts, the new approach ______ the tough problem was considered as the last resort.
A. to solve
B. with solving
C. to solving
D. for solving
[单项选择] After testing a new 100BaseTX cable, the technician determines that only pairs 4, 5, 7, and 8 are straight-thru wires. Which of the following MOST likely describes this cable type?（）
A. Crossover cable with open pairs
B. Crossover cable
C. Rollover cable
D. Straight-thru cable with open pairs
