更多"[多选题]在下面什么地方可以查询到xGW PDSN的告警？
You c"的相关试题:
[多选题]在下面什么地方可以查询到xGW PDSN的告警？
You can query alarms of the xGW PDSN through the following methods: ( ).
A.EMS
B.LMT
C.execute command
D.SNMP
[单选题]对于xGW PDSN，MPU固定在（）槽位。
For the xGW PDSN, the MPU is fixed in slot ( ).
A.20/21
B.0/1
C.18/19
D.3/4
[多选题]PDSN上可以配置的AAA的工作模式有哪几种？
On the PDSN, you can configure the following work modes for the AAA: ( ).
A.主备
Master/Slave
B.负荷分担
Load-sharing
C.轮选
By turn
D.奇偶
Odd-even
[单选题]对于xGW PDSN，SFU固定配置在（）槽位。
For xGW PDSN, SFU is fixed in slot ( ).
A.16/17/18/19
B.0/1/2/3
C.4/5/6/7
D.8/9/10/11
[多选题]xGW PDSN上负荷分担的单板有（）。
For the xGW PDSN, the following boards work in load sharing mode: ( ).
A.MPU
B.GSU
C.PFU
D.SFU
[多选题]对于xGW PDSN，LMT本地维护终端承担（）功能。
For the xGW PDSN, the LMT provides the following functions: ( ).
A.PDSN daily alarm
B.Performance statistics
C.Service signaling trace
D.Board status query
[单选题]关于xGW(PDSN)，下列哪个命令可以显示当前的路由表？
On the xGW(PDSN), the command ( ) is used to get the current routing table.
A.show ip route
B.show ip routing table
C.show ip protocol routing
D.show running-config
[多选题]xGW PDSN上1+1主备工作的单板有（）。
For the xGW PDSN, the following boards work in 1+1 master/slave mode: ( ).
A.MPU
B.GSU
C.PFU
D.SFU
[单选题]关于xGW(PDSN)，哪个命令可以获取单板的内存利用率？
On the xGW(PDSN), we can run the following command to get the memory utilization ratio: ( ).
A.show processor
B.show hardware
C.show running-information
D.show mem-usage
[多选题]关于xGW(PDSN)，下列哪些服务可以通过acl限制？
On the xGW(PDSN), the following services can be restricted through the ACL: ( ).
A.telnet
B.ssh
C.ftp
D.snmp
E.
F.123
G.1234
[多选题]以下哪些命令可以查看xGW(PDSN)系统运行的时间？
On the xGW(PDSN), we can run the following commands to query the system running duration: ( ).
A.show version
B.show software
C.show hardware
D.show processor
E.
F.123
G.12
[多选题]关于xGW(PDSN)，分配IP失败，可能的原因有（）。
On the xGW(PDSN), if IP assignment fails, what are the possible causes? ( )
A.IP池中无可用的IP
There is no available IP address in the IP pool.
B.AAA下发了Framed-pool，但是PDSN没有在realm中配置该IP池
AAA sends the Framed-Pool, but this IP pool is not configured in the realm of the PDSN.
C.PDSN配置IP池的时候使用VRF，但是AAA没有下发VRF ID
The VRF is used when you configure the IP pool on the PDSN, but AAA doesn't send the VRF ID.
D.AAA下发了Framed-Pool，但是PDSN侧该IP池的属性是local
AAA has sent the Framed-Pool, but the attribute of this IP pool is "local" on the PDSN side.
[多选题]关于xGW(PDSN)，当AAA下发了Framed-pool=p1参数给PDSN，PDSN侧p1地址池类型可设置为（）。
On the xGW(PDSN), when the AAA sends the parameter Framed-Pool=p1 to the PDSN, the type of the IP pool "p1" should be set to ( ) on the PDSN side.
A.local
B.aaa
C.assigned
D.static
