题目详情
当前位置:首页 > 职业技能鉴定考试 > 轮机英语
题目详情:
发布时间:2023-10-15 22:22:46

[单项选择]When you notice oil on the water near your vessel while taking on fuel, you should FIRST ().
A. stop loading
B. notify the senior deck officer
C. notify the terminal superintendent
D. determine whether your vessel is the source

更多"When you notice oil on the water ne"的相关试题:

[单项选择]You notice oil on the water near your vessel while taking on fuel. You should first().
A. stop fueling
B. notify the senior deck officer
C. notify the terminal superintendent
D. determ ne whether your vessel is the source
[单项选择]If you detect oil in the water around your vessel while discharging fuel, the FIRST thing to do is().
A. try to find out where the oil is coming from
B. call the Master
C. have the pump man check the discharge piping
D. shutdown operations
[单项选择]If oil density were greater than water’s, the oil separator ().
A. did work
B. would work well
C. didnt work
D. wouldnt work
[单项选择]When jumping into water upon which there is an oil-fire,you should().
A. break the water surface with your hands when diving head-first
B. use your hands to hold your knees to your chest
C. cover your eyes with one hand while pinching your nose shut and covering your mouth with the other
D. enter the water at the bow or stern on the windward side of the vessel
[单项选择]If you have to jump in the water when abandoning a vessel,your legs should be().
A. spread apart as far as possible
B. held as tightly against your chest as possible
C. in a kneeling position
D. extended straight down and crossed at the ankles
[单项选择]If the cooling water temperature and the lube oil temperature in a diesel engine are too high, the cause can be ()
A. a dirty lube oil strainer
B. internal water leaks
C. an oil suction line restriction
D. excessive wears of the cooling water pump
[单项选择]When oil is accidentally discharged into the water,what should you do after reporting the discharge().
A. Contain the oil and remove as much of it as possible from the water
B. Throw chemical agents on the water to disperse the oil
C. Throw sand on the water to sink the oil
D. Obtain your permit from the Corps of Engineers
[单项选择]When you are transferring fuel oil to the setting tanks, precautions to be observed should include ()
A. plugging gooseneck tank vents to prevent accident overflow
B. maintaining a high transfer rate until a slight trickle of oil is observed flowing from the overflow line
C. sounding the tanks frequently and reducing the transfer rate as the level approaches maximum fill
D. maintaining a supply of chemical dispersant to cleanup minor oil spills adjacent to the ship
[单项选择]If found oil when we open low oil level plug of separator, it indicates ()
A. the separator is overload
B. the monitor equipment of separator fails
C. the discharge pump of separator can not work
D. the temperature of oil water is low
[单项选择]While loading bunkers, you notice oil on the water near the vesselWhat should you do first?()
A. Stop loading
B. Notify the harbour administration
C. Determine if the vessel is the source of the pollution
D. Start the main engine and put them in gear to disperse the spill
[单项选择]While taking on fuel, you notice oil on the water around the vesselWhich of the following actions should be taken FIRST?()
A. Stop fueling
B. Notify the dispatcher
C. Notify the terminal superintendent
D. Determine if your vessel is the source
[单项选择]

When centrifuging heavy fuel oil, an important factor to consider is the ()
(1) flow rate
(2) viscosity of the fuel oil


A. (1) only is correct
B. (2) only is correct
C. both (1) and (2) are correct
D. neither (1) or (2) are correct
[单项选择]When separating the lube oil without additive, it is usually cleaned with hot water; the aim is to remove () from it.
A. acid
B. sludge
C. mechanical impurity
D. salinity
[单项选择]When finish work on the oil separator, you should()firstly.
A. cut off the power
B. cut off the oil inlet
C. open guide water valve
D. close oil outlet value
[单项选择]When separating fuel oil in oil separator, the separating quantity is() of the real quantity.
A. 100%
B. 80%
C. 1/2
D. 1/3
[单项选择]You detect oil around your tank vessel while discharging. The first thing to do is().
A. try to find out where the oil is coming from
B. call the master
C. have the pumpman check the discharge piping
D. shut down operations
[单项选择]When your vessel is on or near the path of an approaching tropical storm the().
A. wind direction remains steady
B. wind speed increases
C. barometer falls
D. All of the above
[单项选择]When the ship causes oil pollution to the port, she will be().
A. fined
B. levied
C. paid
D. deducted
[单项选择]When the heavy fuel oil is heated to achieve the viscosity of 10-15 cst, may occur.To avoid this, a system is used in most occasions()
A. boiling and cavitations; low temperature
B. boiling and cavitations; pressurized
C. leaking and boiling; low temperature
D. leaking and boiling; pressurized

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码