题目详情
当前位置:首页 > 职业技能鉴定考试 > 轮机英语
题目详情:
发布时间:2023-12-05 18:41:10

[单项选择]The amount of fuel delivered by a helical plunger fuel injection pump is controlled by ()
A. varying the pump discharge pressure
B. varying the pump return pressure
C. rotation of the pump plunger
D. rotation of the pump barrel

更多"The amount of fuel delivered by a h"的相关试题:

[单项选择]The amount of fluid delivered by a helical pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the rotor
C. either A or B
D. None of the above is tree
[单项选择]The amount of fuel delivered by a unit injector is controlled by the ()
A. camshaft
B. main spring
C. rack position
D. nozzle orifice size
[单项选择]The amount of fuel delivered for each cycle must be in accordance with the engine load, and the same quantity of fuel must be delivered to each cylinder for each power stroke at that load.Which of the following statements describes this requirement?()
A. Proper timing
B. Accurate metering
C. Suitable injection rate
D. Suitable atomization rate
[单项选择]The plunger in the fuel injector pump, usually operated by a (), is driven up and down when working.
A. crankshaft
B. camshaft
C. piston rod
D. rack and pinion
[单项选择]The amount of fuel injection into a diesel engine cylinder by a unit injector, is controlled by()
A. the firing pressure in the cylinder
B. a metering helix inside the pump
C. varying the physical length of the plunger stroke
D. varying the clearance between the injector cam and the injector rocker arm
[单项选择]The amount of fuel injected in a particular time, or degree, of crankshaft rotation is termed ().
A. metering
B. timing
C. rate of injection
D. rate of distribution
[单项选择]It should be evident that the amount of fuel injected into the cylinder is dependent on the position of the helix relative to the ().
A. inlet port
B. exhaust port
C. spill port
D. scavenge port
[单项选择]If the plunger or barrel of a fuel injection jerk pump becomes damaged,()
A. only the replacement of the entire pump would be acceptable
B. the injection pump and injection nozzle must be replaced
C. either the barrel or plunger must be replaced
D. the barrel and plunger must be replaced as a unit
[单项选择]In a unit injector the amount of fuel that will be forced through the spray nozzle on each stroke of the plunger depends on ()
A. the pump supply pressure
B. the slope of the fuel cam
C. how the plunger is rotated
D. the number of sleeve segments engaged with the rack
[单项选择]In a jerk pump, the amount of fuel that will be forced through the spray nozzle on each upward stroke of the plunger depends on ()
A. the pump supply pressure
B. the slope of the fuel cam
C. how the plunger is rotated
D. the number of sleeve segments engaged with the rack
[单项选择]A common trouble with the fuel pump plunger or fuel valve spindle is ().
A. water leakage
B. steam leakage
C. oil leakage
D. air leakage
[单项选择]The amount of fluid delivered by a positive displacement pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the driving rotor
C. either A or B
D. None of the above is tree
[单项选择]The amount of fluid delivered by a reciprocating pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the piston
C. either A or B
D. None of the above is tree
[单项选择]The amount of fluid delivered by a centrifugal pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the rotor
C. either A or B
D. None of the above is tree
[单项选择]On a diesel engine, fuel is delivered into the combustion space by ().
A. a cooling system
B. a lubrication oil system
C. an electric system
D. an injection system
[单项选择]Fuel is delivered into the combustion space by ().
A. a cooling system
B. a lubricating system
C. an electric system
D. an injection system
[单项选择]The amount of fluid delivered by a screw pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the rotor
C. either A or B
D. None of the above is tree
[单项选择]The amount of fluid delivered by a gear pump can be regulated by ().
A. throttling the pressure line
B. changing the speed of the rotor
C. either A or B
D. None of the above is true
[单项选择]The amount of expansion space to be left in a fuel tank when fuel oil is being received, is determined by the ().
A. quantity of fuel to be received
B. flash point of the fuel as it is received
C. fuel temperature as it is received
D. viscosity of the fuel being received

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码