更多"A switch is configured as a vtp sev"的相关试题:
[单项选择]A switch is configured as a vtp sever with a domain name of CCNA.Which cisco ios privileged mode command,followed by a reload of the swith,will reset the VTP management domain name of the switch to a NULL value?（）
A. #vtp domain unset
B. #delete vlan.dat
C. #no vtp domain
D. #vtp domain null
[单项选择]VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan3 commmand interface configuration mode？（）
A. The command is accepted and the respective VLAN is added to vlan dat.
B. The command is rejected.
C. The command is accepted and you must configure the VLAN manually.
D. The port turns amber.
[单项选择]VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）
A. The command is accepted and the respective VLAN is added to vlan dat.
B. The command is rejected.
C. The command is accepted and you must configure the VLAN manually.
D. The port turns amber.
[单项选择]A workgroup switch is configured with all ports assigned to VLAN 2. In addition,all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?（）
A. The additions will create more collision domains.
B. IP address utilization will be more efficient.
C. More bandwidth will be required than was needed previously.
D. An additional broadcast domain will be created.
E. The possibility that switching loops will occur will increase dramatically.
[单项选择]A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffiC.What is the effect of adding switch ports to a new VLAN on the switch?（）
A. More collision domains will be created.
B. IP address utilization will be more efficient.
C. More bandwidth will be required than was needed previously.
D. An additional broadcast domain will be created.
[单项选择]When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。
A. no VLANs
B. all VLANs
C. only VLANs 1 - 64
D. only the VLANs that are specified when creating the trunk
[单项选择]Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?（）
A. Transparent
B. Server
C. Auto
D. Client
E. User
[单项选择]Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）
A. Reverse ARP
B. Full duplex on the fiber link
C. PoE
D. 802.1q trunking
[多项选择]VTP is configured on switch R1. Which of the following features were added in VTP version 2 that were not previously supported in VTP version 1？（）
A. Supports Token Ring VLANs.
B. Allows VLAN consistency checks.
C. Saves VLAN configuration memory.
D. Reduces the amount of configuration necessary.
E. Allows active redundant links when used with spanning tree.
[单项选择] Switch R1 has been configured with the root guard feature. What statement is true if the spanning tree enhancement Root Guard is enabled？ （）
A. If BPDUs are not received on a non-designated port， the port is moved into the STP loop- inconsistent blocked state
B. IF BPDUs are received on a PortFast enabled port， the port is disabled.
C. If superior BPDUs are received on a designated port， the interface is placed into the root- inconsistent blocked state.
D. If inferior BPDUs are received on a root port， all blocked ports become alternate paths to the root bride.
[多项选择] Switch R1 is configured with VTP. Which two VTP modes will make R1 capable of creating and deleting VLANs on itself？ （）
A. Client
B. Server
C. Transparent
D. Pass-through
E. No-negotiate
