更多"Which two design recommendations ar"的相关试题:
[多项选择]Which two design recommendations are most appropriate when EIGRP is the data center core routing protocol?（）
A. Summarize data center subnets.
B. Use passive interfaces to ensure appropriate adjacencies.
C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D. Adjust the default bandwidth value to ensure proper bandwidth on all links.
E. Advertise a default summary route into the data center core from the aggregation layer.
[多项选择]In a collapsed core design, which two benefits are provided by a second-generation Cisco MDS director（）
A. a higher fan-out ratio
B. fully redundant switches
C. 100 percent port efficiency
D. allI S Lscontained with inasingle chass is
E. higher latency and through put than acore-edged esign switch
[多项选择]Which two characteristics are most typical of a SAN? （）
A. NICs are used for network connectivity.
B. Servers request specific blocks of data.
C. Storage devices are directly connected to servers.
D. A fabric is used as the hardware for connecting servers to storage devices.
E. The TCO is higher because of the cost of director class storage switches.
[多项选择]Which two of these multicast deployments are most susceptible to attacks from unknown sources?（）
A. ASM
B. BiDirPIM
C. PIM-SMRP
D. RP-Switchover
E. SourceSpecificMulticast
[多项选择]Which two design goals describe the Junos OS design?（）
A. clean separation of security and routing policies
B. clean separation of control and forwarding planes
C. modularization of multiple software processes
D. a single hardware platform for all software applications
[多项选择]Which two design concerns must be addressed when designing a multicast implementation?（）
A. only the low-order 23 bits of the MAC address are used to map IP addresses
B. only the low-order 24 bits of the MAC address are used to map IP addresses
C. only the high-order 23 bits of the MAC address are used to map IP addresses
D. only the low-order 23 bits of the IP address are used to map MAC addresses
E. the 0x01004f MAC address prefix is used for mapping IP addresses to MAC addresses
F. the 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses
[多项选择]Which two features vary the most between Cisco Small Business NSS storage platform models?（）
A. FTP sessions supported
B. drive size options
C. RAID versions supported
D. number of CIFS/NFS users supported
E. number of drive bays per platform
[多项选择]Which two scenarios would benefit the most from TCP Acceleration? （）(Choose two.)
A. low-latency networks
B. high-latency networks
C. long-haul, low-bandwidth links
D. long-haul, high-bandwidth links
[单项选择]Of the following estimates, which most accurately reflect the actual cost of the project ？（）
A. Conceptual estimate
B. Order of magnitude estimate
C. Preliminary estimate
D. Bottom-up estimat
[多项选择]Which two design recommendations are most appropriate when OSPF is the data center core routing protocol？ （）
A. Never use passive interfaces.
B. Use NSSA areas from the core down.
C. Use totally stub areas to stop type 3 LSAs.
D. Use the lowest Ethernet interface IP address as the router ID.
E. Tune OSPF timers to enable OSPF to achieve quicker convergence
[多项选择]Which two partitioned table maintenance operations support asynchronous Global Index Maintenance inOracle database 12c?（）
A. ALTER TABLE SPLIT PARTITION
B. ALTER TABLE MERGE PARTITION
C. ALTER TABLE TRUNCATE PARTITION
D. ALTER TABLE ADD PARTITION
E. ALTER TABLE DROP PARTITION
F. ALTER TABLE MOVE PARTITION
[多项选择]Which two statements regarding JUNOS architecture are correct?（）
A. The Routing Engine handles all exception traffic.
B. The Routing Engine synchronizes the route table with the PFE
C. The Routing Engine is hot-pluggable.
D. The Routing Engine controls the PFE
[多项选择]Which two design concerns must be addressed when designing a multicast implementation？（）
A. only the low-order 23 bits of the MAC address are used to map IP addresses
B. only the low-order 24 bits of the MAC address are used to map IP addresses
C. only the high-order 23 bits of the MAC address are used to map IP addresses
D. only the low-order 23 bits of the IP address are used to map MAC addresses
E. the 0x01004f MAC address prefix is used for mapping IP addresses to MAC addresses
F. the 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses
[多项选择]Which two statements are correct regarding default protocol preference values?（）
A. OSPF internal routes have a lower preference than static routes.
B. Both direct and local routes have the same preference value.
C. OSPF's preference value is lower than BGP.
D. OSPF has a single preference value for both internal and external routes.
[多项选择]Which two statements describe the criteria bandwidth detection uses to dynamically alter bandwidth allocation?（）(Choose two.)
A. Throughput is raised as latency decreases.
B. Throughput is based on available bandwidth.
C. Throughput is lowered as latency decreases.
D. Latency is measured by SYNs returned for each metapacket.
[多项选择]Which two Junos platforms provide stateful firewall functionality?（）
A. MX Series
B. EX Series
C. SRX Series
D. QFX Series
[多项选择]Which two statements about creating constraints are true?（）
A. Constraint names must start with SYS_C
B. All constraints must be defines at the column level
C. Constraints can be created after the table is created
D. Constraints can be created at the same time the table is created
E. Information about constraints is found in the VIEW_CONSTRAINTS dictionary view
[多项选择]Which two differentiators make RSTP the preferred protocol for preventing Layer 2 loops in aswitched network environment?（） (Choose two.)
A. Features such as UplinkFast and BackboneFast are compatible with RSTP.
B. An RSTP that is based on Cisco products generally performs better than the Cisco proprietary 802.1D enhancements.
C. Cisco proprietary enhancements are not transparent.
D. Information about port roles is sent to all switches.
E. RSTPs that are based on Cisco products require no additional configuration.
[多项选择]Which two statements are true regarding interface properties? （）
A. MTU and speed must be configured under each unit.
B. Physical parameters such as MTU, duplex mode, and speed are configured under the interface name.
C. IP and IPv6 addresses are configured under a unit-number.
D. DLCI numbers, VPI/VCI values, and VLAN tags are physical parameters.
