更多"A user is attempting to connect to "的相关试题:
[单项选择]A PC cannot connect to the network. A network card was purchased without documentation ordriver discs. Which of the following is the BEST way to install it into this machine?（）
A. Download and install the drivers
B. Run Windows update to install drivers
C. Copy drivers to flash drive and install
D. Purchase the disc online and install
[单项选择] A remote user is attempting to install a new external storage device on their computer. The user reports they only have one port open on the back of the device and the port is similar to the USB port their mouse is connected to. The port has a bevel on one side and is slightly larger than the USB port. Which of the following connector types is MOST likely being described?（）
A. IEEE 1394
B. USB 2.0
C. PCMCIA
D. Parallel
[单项选择] A user is attempting to access files shared on a remote computer. The file share permissions allow the user to have full control; however, the NTFS permissions allow the user to have read access. Which of the following is the user’s resulting access level for the remotely shared directory?（）
A. Modify
B. Full control
C. Write
D. Read
[单项选择] A user is attempting to access a website but is getting a ‘Page cannot be displayed’ error. The technician checks the IP address of the computer and sees that it has been assigned 169.254.10.70. Which of the following is the MOST likely cause?（）
A. The device is located behind a firewall.
B. The network card is disabled.
C. The device is not configured for DHCP.
D. The device cannot locate a DHCP server.
[单项选择]A user on a network cannot access any network resources. The link light on the computer showsthat a connection is present. Which of the following is the MOST likely cause of the problem?（）
A. The wrong cable type has been used.
B. . IDS has shut down the computer's switch port.
C. The port on the switch is configured incorrectly
D. Spanning tree protocol was implemented.
[单项选择] A remote user cannot connect to the office via VPN. The user has established Internet connectivity. Which of the following is the MOST likely next step in troubleshooting?（）
A. Power cycle the VPN concentrator at the office.
B. Determine if the VPN service is running at the office.
C. Reinstall the VPN client at the remote computer.
D. Determine if the user has the correct VPN address and password.
[单项选择]A home user would like to connect their laptop display to their home HD television. Which of the following is the BEST solution?（）
A. Connecting the laptop’s VGA output to an HDMI adaptor
B. Connecting the laptop’s VGA output to the television’s VGA input
C. Connecting the laptop's USB output to the HD television’s HDMI adaptor
D. Connecting the laptop’s USB output to the television’s USB input
[单项选择] A user reports that a network printer will not print, however, other users are not experiencing any problems. The user has rebooted their computer twice and it is still not printing. Which of the following should the technician check?（）
A. Run the printer configuration wizard on the desktop.
B. Check to see if the network printer is turned on.
C. Verify that the printer is connected to the network.
D. Check the local print queue for a failed print job.
[单项选择] A user is trying to use Remote Desktop to connect to another computer on the LAN. Theconnection fails. The technician opens up a command prompt and types the following: “telnetcomputernamE. 3389” and also gets the same error message. Which of the following is the MOSTlikely cause of this error, assuming that the OS firewall has been disabled?（）
A. The antivirus software is blocking the incoming connection.
B. The ISP is blocking Remote Desktop at their end.
C. The RDP connection has been configured to use a non-standard port.
D. The telnet service has not been installed.
[单项选择] A user reports that the wireless network is slow and is able to see and access shared folders that are unknown to the user. Which of the following is the cause of the problem?（）
A. The SSID broadcast is disabled.
B. Wireless router is improperly configured.
C. The user is connecting to the wrong SSID
D. The wireless NIC is defective.
[单项选择] A user plugged a cable between two network jacks that attach to the same switch and caused a broadcast storm. Which of the following would have prevented the broadcast storm?（）
A. Spanning tree
B. VLAN tagging
C. 802.1x
D. Port mirroring
[单项选择]Which IOS user EXEC command will allow a network technician to determine which router in the path to an unreachable network host should be examined more closely for the cause of the network failure?（）
A. TestKingB> telnet
B. TestKingB > ping
C. TestKingB > trace
D. TestKingB > show ip route
E. TestKingB > show interface
F. TestKingB > show cdp neighbors
[单项选择]A user is trying to connect a mobile IR printer to a mobile device with no success. Which of the following is the MOST important when printing to an IR printer?（）
A. Enough light
B. Line of sight
C. Correct printer drivers
D. Enough power
[单项选择] A user is trying to connect their new desktop to the network but is unable to get an IP address. The technician tests the cable and finds that there are too many open pairs. Which of the following wiring standards needs to be used in the replacement cable?（）
A. 568B
B. Crossover
C. 569-A
D. 607-A
[多项选择]A user has a new network printer they want setup in their home. The user wants all their PCs aswell as any guests with laptops to be able to print to it. Which of the following connection methods would be the MOST effective for meeting these requirements？（）
A. 802.11g
B. USB
C. Ethernet
D. Bluetooth
E. Serial
[单项选择]A home user wants to setup a wireless network. Which of the following would be the MOST important consideration?（）
A. Operating system type of the connected PCs
B. Location of the wireless router
C. Number of PCs that will access the network
D. Number of available Ethernet ports on the router
[单项选择]A user is unable to print to the network printer. A print job appears in their print queue and cannotbe deleted. The user has the correct permissions to modify and delete print jobs. All other users are able to print to the network printer. Which of the following procedures should the technician try FIRST?（）
A. Cycle the power on the network printer.
B. Verify the network cable is connected to the printer.
C. Reinstall the printer driver.
D. Restart the print spooler service.
[单项选择] A user is unable to connect to the company's intranet server by FQDN, but can connect by IP address. Other users are not having a problem. An administrator verifies that the user can successfully ping the server by IP address and can properly resolve the FQDN using nslookup. The problem is persisting after running ipconfig /flushdns. Which of the following should the administrator do NEXT?（）
A. Examine the Imhost file.
B. Flush the cache on the DNS server.
C. Flush the cache on the WINS server.
D. Examine the hosts file
[单项选择] An administrator is attempting to recover afilesystem that fails to manually unmount. The fsck command produces the following output: The current volume is: /dev/fslv02 File system is currently mounted. Invalid file system size in the primary superblock. Invalid file system size in the secondary superblock. Primary superblock is corrupt. Secondary superblock is corrupt. fsck: Cannot continue tried to mount Which steps will resolve the problem?（）
A. Reboot the server into maintenance mode and run 'fsck' with the '-p' parameter while the filesystem is mounted
B. Reboot the server into maintenance mode and run 'fsck' with the '-y' parameter whilethe filesystem is unmounted
C. Force a umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck p /dev/fslv02' while the file system is unmounted
D. Force a umount of the filesystem by varying off the hosting volume group and then varyon the volume group. This will permit 'fsck -y' to be run against the failing filesystem
