更多"An administrator recently installed"的相关试题:
[单项选择]A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which statement is true?（）
A. Executing password recovery is required.
B. The virtual terminal lines are misconfigured.
C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D. Power cycle of NewSwitch will return it to a default configuration.
[单项选择]An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）
A. The NIC is not on the HCL.
B. The driver is incorrect on the server.
C. The patch cable has not been seated properly.
D. The NIC is not seated properly.
[单项选择] An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this？（）
A. The server BIOS firmware is out-of-date.
B. The server does not have the correct drivers.
C. The server hard drives have not begun to spin.
D. The server has too little memory installed.
[单项选择]Recently three new applications were installed on all the desktops in a company branch. One of the applications causes Windows to crash on startup, but the technician is unable to find out which application it is. Without removing all three applications, which of the following is the BEST way to determine the cause of the crash?（）
A. Launch REGEDIT and remove the offending applications from the Run key.
B. Start the computer in Safe Mode and check Event Viewer.
C. Put in the ERD and when the window pops up select the option for Repair Broken Links and Applications.
D. Hit the F6 key as Windows loads and run Repair Broken Links and Applications.
[单项选择]An administrator installed new components on a server. After the device installation， two of the components fail.Which of the following is the cause of the problem？（）
A. The server was not powered off correctly.
B. The proper ESD procedures were not used.
C. The devices were installed in the incorrect sequence.
D. The devices are incompatible with the system.
[单项选择] var a = new Array(new Array(9,0,3,6,5), new Array(2,9,0,6)); 则a[0][3]=（）
A. 3
B. 6
C. 5
D. 0
[单项选择] An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）
A. The server's firewall is misconfigured.
B. The server's timeout feature is set incorrectly.
C. The web server was not installed properly.
D. The company firewall is misconfigured.
[单项选择] var arr = new Array(new Array(9,0,3,4,5) , ['a' , 'b' , 'c'] , new Array(2,9,0,6)); 则arr[1][3]=（）
A. c
B. 6
C. 4
D. undefined
[单项选择]A technician recently installed a new firewall. Which of the following ports must be open to permit HTTPS traffic?（）
A. 21
B. 23
C. 80
D. 443
[单项选择]A company has recently received a new ADSL backup Internet connection. Which of the followingwill MOST likely be used between the modem and the ISP?（）
A. PPPoE
B. RAS
C. IPSec
D. MSCHAP
[单项选择]A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which statement is true？（）
A. Executing password recovery is required.
B. The virtual terminal lines are misconfigured.
C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D. Power cycle of NewSwitch will return it to a default configuration.
[单项选择]I suggested he should ______ himself to his new conditions.
A. adapt
B. adopt
C. regulate
D. suit
[单项选择] An administrator has installed 1 VIO Server and 5 client LPARs on a 16-core Power 570 with the following CPU requirements： Virtual Processors Processing Units Min Desired Max Min Desired Max VIOS1 1 2 4 0.1 1.0 2.0 LPAR1 4 4 4 4.0 4.0 4.0 LPAR2 2 5 8 1.0 5.0 6.0 LPAR3 1 3 4 0.1 0.3 1.0 LPAR4 3 6 9 0.5 3.0 6.0 LPAR5 1 3 6 1.0 3.0 .06 If the administrator activates the LPARs in the above order， what will be the result？ （）
A. All LPARs will start except LPAR5.
B. All LPARs will start with desired capacity.
C. All LPARs will start but LPAR5 will have its minimum capacity assigned.
D. All LPARs will start but LPAR5 will have less than its desired capacity.
