题目详情
当前位置:首页 > 职业培训考试
题目详情:
发布时间:2023-11-14 03:46:31

[判断题]硬件扩容必须准备的工具包括CMM串口线,因为防止使用网口不能正常登陆情况下需要使用串口登录进行CDM的配置。 During hardware expansion, you must prepare a CMM serial cable, in case that you need to log in to the serial port to make CDM configuration when the network port cannot be logged in to properly.
A.正确
B.错误

更多"[判断题]硬件扩容必须准备的工具包括CMM串口线,因为防止使用网口不能"的相关试题:

[判断题]ZXUN SSS扩容都是在线扩容,按形式可以分为硬件扩容和软件扩容。 The expansion of the ZXUN SSS system is made in online mode. According the expansion mode, it is divided into hardware expansion and software expansion.
A.正确
B.错误
[判断题]SSS升级前需要准备两根串口线,分别是CMM串口线编号DS-29913-002,USCC串口线编号DS-29913-004。 Before upgrade of the SSS system, we need to prepare two serial cables: CMM serial cable DS-29913-002 and USCC serial cable DS-29913-004.
A.正确
B.错误
[判断题]家庭宽带敏捷扩容必须经过区公司审批。( )
A.正确
B.错误
[单选题]CSCF硬件模块扩容不需要修改哪条数据。
A.增加模块
B.增加模块容量
C.修改IP分发表
D.增加CSCF虚地址
[判断题]ZXUN xAGCF系统扩容前需要准备好扩容相关文档,此文档应该详细描述扩容前后单板变化,扩容相关操作,扩容相关风险及扩容后测试,观察值守等信息。 Before expansion of the ZXUN xAGCF, you should prepare the corresponding expansion document, which describes board changes after expansion, related expansion operations, expansion risks, tests after expansion, and on-duty observation.
A.正确
B.错误
[判断题]休克治疗时扩血管药物必须在充分扩容的基础上使用.
A.正确
B.错误
[简答题]装维人员可以进行的扩容操作是 扩容。
[判断题]对于软件扩容仅需扩容license,无需其他操作。 For software expansion, usually you only need to expand the license and do not need to perform other operations.
A.正确
B.错误
[单选题]CSCF V4平台在线扩容应以( )个单板为单位进行扩容。
A.1
B.2
C.3
D.4
[单选题]【单选题】ECS在使用的过程中如果数据盘空间不够,可以使用扩容功能,扩容云盘只是扩大存储容量,但不会扩容
A.文件系统
B.数据盘
C.操作系统
D.共享块存储
[单选题]扩容IGSU单板,需要依据扩容模块前台运行的()进程确定增加SIP端口个数。
A.SIP_TP
B.SIP_TC
C.SIP_TU
D.SIP_UA
[单选题]Rainbow块级迁移支持扩缩容,而文件级迁移只支持扩容,不支持缩容。
A.True
B.False
[判断题]ZXUN CSCF系统扩容时只需要增加硬件配置好相关的数据即可。 During expansion of the ZXUN CSCF, you only need to add related hardware configurations.
A.正确
B.错误
[判断题]锅炉排污扩容器是回收锅炉排污水热量和扩容后蒸汽再利用的设备。 (  )
A.正确
B.错误
[判断题]ZXUN xAGCF扩容前需要检查NCMM配置,确认待扩容的单板操作配置是否符合实际单板的配置,如果不符合要求,应立即当场修改,防止扩容时遗忘。 Before expansion of the ZXUN xAGCF, you should check NCMM configurations to verify that configurations of the board to be expanded comply with the actual board configurations. Otherwise, you should modify configurations immediately.
A.正确
B.错误
[判断题]SSS扩容后需要注意自身的接口变化,包括Provision接口变化,所以在扩容后需要联系BOSS进行业务发放测试。 After SSS expansion, you should pay attention to interface changes of the SSS, including the change of the Provision interface. Therefore, after SSS expansion, you need to contact the BOSS system to perform service distribution tests.
A.正确
B.错误
[判断题]ZXUN xAGCF扩容前需要和商务确定本次扩容增加的容量后确定新的合同容量,根据此项重新申请LICNESE。 Before expansion of the ZXUN xAGCF, you should communicate with the commercial personnel to confirm the expanded capacity, determine the new contract capacity, and apply for a new license according to the new contract capacity.
A.正确
B.错误
[判断题]在需要新增扩容机框的情况下,级联两对USCC单板,需要将base面的内部级联解除一对,否则会引起环路。 When a new shelf is added, two pairs of USCC boards are cascaded. You should remove one pair of internal cascading on the Base plane; otherwise, loopback occurs.
A.正确
B.错误

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码